TURNING OFF YOUR HOUSE'S MAIN WATER SUPPLY: A COMPREHENSIVE GUIDE

Turning Off Your House's Main Water Supply: A Comprehensive Guide

Turning Off Your House's Main Water Supply: A Comprehensive Guide

Blog Article

Find Out More

Just how do you really feel in regards to How to Turn of?


How to Find and Shut Off Main Water Shutoff Valve
If you try to close the water off to your fixtures by utilizing an angle stop and that does not work you will need to close of the water pipe to make your repair work. There are likewise many various other factors you may require to shut the water main like repairing frozen pipelines, fixing leakages, changing fixtures or faucets.
Many individuals are not mindful that they even have a water pipe valve right in their very own residence and simply call a plumber of never wind up doing the repair work up until things get actually poor due to the fact that they simply do not know that shutting the water pipe is actually easy.
One of the most common locations a water pipe will certainly be located in home remains in your boiler room, cellar, or a cut out panel in a section for your house.
When you locate the water main you will merely transform the valve clockwise to shut all the water off in your house up until you have actually completed the repair service. Some residences will certainly enjoy valve with a bar that you can pull as opposed to resort to close the water off.

How to Find Your Home Water Main


Weather is becoming more extreme every year. That means higher risks of flash floods and storm surges, even in places normally not used to it. Today, we’ll give you some guidance on how to find your home’s water main (shutoff valve). Knowing where your water shutoff valve is can prevent catastrophic flood damage, longer-term plumbing damage, and help you stop plumbing leaks. It’s also something that’s just good to know.


Where is your home water main (shutoff valve)?


  • Inside your house, likely on a wall on the street side of your house


  • In warmer climates, outside your home near an outside faucet


  • Outside your house, near your curb, under a plastic or metal lid likely marked water


  • Outside your house, near your private well pump and/or near your pressure tank


  • The first three options apply if you use municipal water (i.e., city water). The fourth option applies if you use well water. So, the first step in finding your main water shutoff valve is figuring out whether your water supply is municipal or well. In general (but not always), if you pay a water bill, chances are you use municipal water.



    Now, let’s look at some specific tips for finding each kind of water shutoff valve. The best time to do this is before you need to. So, take a few minutes on a nice day to look for your shutoff valve, instead of waiting until you need to know where it is.


    Where to look INSIDE your house for the shutoff valve


    First, start by going outside to the front of your house. Look for a faucet that comes out from the wall on the outside. This will help you narrow down where your indoor water shutoff valve might be.



    Next, go back inside and to the lowest part of your house (basement or first floor). Recall where the outdoor faucet was. Walk to the location on your inside wall, about where the outside faucet appears on the outside. If you see either a lever or a wheel valve connected to metal pipes, you’ve likely found your water shutoff valve. (If not, go to the next section.)



    Then, turn the valve clockwise (to the right) until it stops. If it’s a lever-style valve (i.e., ball valve), you’ll turn it a quarter turn so that the valve is perpendicular (i.e., like a cross) to the pipe it’s connected to. If it’s a wheel-style valve (i.e., gate valve), turn the wheel clockwise until it stops.


    Near an outside faucet


    If you live in a warmer climate, check the faucets connected to your house. You’ll likely see that one of your faucets has either a lever or wheel valve right next to it. That’s your shutoff valve.



    Turn the valve clockwise (to the right) until it stops. It it’s a lever-style valve (i.e., ball valve), you’ll turn it a quarter turn so that the valve is perpendicular (i.e., like a cross) to the pipe it’s connected to. If it’s a wheel-style valve (i.e., gate valve), turn the wheel clockwise until it stops.



    In the ground near your curb


    If you didn’t find your main water supply inside or connected to your house, check your street-side curb. Your shutoff valve may be housed in a cement box with a plastic or metal lid that says water. You’ll need a water meter key, which you can buy at a hardware store, or sturdy pliers for this.



    First, you’ll first want to remove the lid. If the lid is locked, you’ll need to call your municipal water service for instructions on how to open it.



    If there’s dirt or sand inside, remove it and put it to the side. You’ll need to put it back when you’re through, as the dirt or sand prevents freezing.



    Next, you’ll likely see two valves. Only use the valve that is closest to your house. The other valve is the city valve, which you don’t want to fiddle with. (You likely won’t be able to, since it requires special tools, but just steer clear of it entirely.)



    Using the water meter key or your pliers, turn the valve clockwise to close it. Reverse the process to turn it back on. But remember: When turning the water back on, GO SLOW with your counterclockwise turn.

    https://www.2-10.com/blog/how-to-find-home-water-main-shutoff-valve/


    How to Turn off the Water for Plumbing Repairs

    As an enthusiastic person who reads on How to Find and Shut Off Main Water Shutoff Valve, I imagined sharing that excerpt was worthwhile. Enjoyed reading our posting? Please share it. Let someone else locate it. I am grateful for your time. Visit us again soon.


    Tap leaks? Inform.

    Report this page